Brisbane City Council: Dedicated to a
better Brisbane
Traffic alert - Brisbane City Council
Search Traffic Updates Roadworks Events  

Road Works Information

Below is a list of the current "road works" that may affect traffic flow on major Metropolitan Roads.

CBD Suburbs

West End | Riverside Drive
Last updated: Monday, November 23, 2009 at 05:00:00 AM

Riverside Drive will be closed between Bouquet Street and Merivale Rail Bridge until June 2010. There will also be lane closures due to roadworks on Montague Road, Merivale Street, Cordelia Street and Boundary Street until July 2010. For further information please contact the Hale Street Link Alliance on 1800 425 378.

South Brisbane | Merivale Street
Last updated: Monday, November 23, 2009 at 05:00:00 AM

From Monday 4 May the following traffic conditions will be in place in South Brisbane area: - Merivale Street will become one way southbound from Montague Road (towards Vulture Street). - Peel Street will become two way between Cordelia and Merivale Street. - No right turn or left turn from Peel Street to Merivale Street (towards Montague Road). - Motorists travelling from Grey Street (William Jolly Bridge) along Peel Street can access Montague Road via a new dedicated right turn into Cordelia Street or alternatively via the left turn into Little Stanley Street. - No right turn from Peel Street to Merivale Street (towards Vulture Street). - Temporary no left turn from Cordelia Street to Peel Street- motorists can access Peel Street via Cordelia Street then Boundary Street. - Alternative route to Montague Road use left turn off the William Jolly Bridge. For more information on these traffic changes, please call the Hale Street Link Bridge Project Hotline on 1800 425 378.

Brisbane City | Hale Street
Last updated: Monday, November 23, 2009 at 05:00:00 AM

The two right turn lanes from Hale Street to Coronation Drive have been closed. They will be closed until completion of the Go Between Bridge (formerly the Hale St Link Bridge) in mid-2010. Motorists are advised to seek alternative routes during the closure period. It is anticipated that the closure will cause moderate / significant delays. For more information on these works, please call the Project Hotline on 1800 425 378 or visit www.halestreetlink.com.au.

Brisbane City | Pacific Motorway
Last updated: Monday, November 23, 2009 at 05:00:00 AM

The Department of Transport and Main Roads will be conducting scheduled routine maintenance work along the Riverside Expressway until June 2012. Work will be carried out between 8.00pm and 5.00am mid week as required. Regular lane closures, traffic delays and detours are expected. Motorists will be advised of specific traffic changes prior to the commencement of work. They can also subscribe to regular maintenance updates by emailing rexmaintenance@mainroads.qld.gov.au. For further information please contact the Project Manager on 3137 3064

Brisbane City | Coronation Drive
Last updated: Monday, November 23, 2009 at 05:00:00 AM

Major traffic changes will affect Coronation Drive between Cribb Street and Merivale Rail Bridge for maximum four month period from Sunday 1 November 2009. These major changes, in the area of the Go Between Bridge (formerly Hale Street Link), are essential to complete construction of the Coronation Drive overpass. Traffic changes effective Sunday 1 November 2009 are: • Outbound – Coronation Drive: traffic travelling through to Coronation Drive (towards Toowong) from the Riverside Expressway will now use lanes on the right-hand or northern side of Boomerang Street overpass. Lanes previously used will be diverted for overpass construction. • Outbound – Boomerang Street overpass: traffic taking the Boomerang Street (northern suburbs) overpass from Riverside Expressway towards Inner City Bypass, will now need to be in the left-hand or riverside lane to access the overpass. • Inbound – Coronation Drive: traffic will be reduced to two lanes between Cribb Street and the Merivale Rail Bridge. Traffic changes will result in increased travel times on Coronation Drive (inbound), Milton Road (inbound), Hale Street (inbound), Riverside Expressway (inbound/westbound) and the surrounding road network. Motorists are advised to: Follow the signs • Motorists are advise to slow down, follow signage, and take care when driving through the changed conditions. Allow more time and consider alternatives. • Significant peak hour delays will exist on Coronation Drive with day and night works required up to 7 days per week. • Motorists are advised to allow more time for their journeys if travelling through the project between these dates. • Motorists are advised to consider alternative routes and methods of travel. For more information and to view detailed maps of the changes visit www.halestreetlink.com.au or phone 1800 HALE ST, on 1800 425 378).