Supporting reports, plans and drawings
The expert technical reports that accompany your development application must meet the below reporting requirements.
Air quality impacts
Requirements for the Air quality impact assessment report and the relevant standards and guidelines.
Bushfire reporting
A guide to undertaking a Bushfire Hazard Assessment and the development assessment requirements relating to the preparation of a Bushfire Management Report.
Ecological reports
Guidelines to assist in the preparation of ecological assessment reports.
Erosion and sediment control
Your development should not result in adverse impacts from erosion and sedimentation. Find out about Council's requirements including hazard assessment, and design and inspection certificates.
Flooding and stormwater impacts
A guide to addressing flooding and overland flow impacts in a Flood study (major and minor) and Site-based stormwater management plans.
Heritage
Information on retaining heritage values including procedures, guidelines and standards required for a Heritage impact assessment report.
Landscaping
Requirements relating to the preparation of a Vegetation survey and retention plan.
Noise impacts
Requirements for the preparation of a Noise impact assessment report and measures for managing noise.
Planning assessment report
Requirements for the preparation of a planning assessment report.
Plans and drawings
Requirements for plans and drawing standards to be submitted with a development application.
Stormwater quality management
Your development should seek to achieve acceptable levels of stormwater run-off quantity and quality by applying total water cycle management and water sensitive urban design principles in your Stormwater quality management plan.
Transport air quality corridor report
Requirements for a Transport air quality corridor report and the relevant standards and guidelines.
Transport impacts
A guide to address traffic management and control requirements in a Traffic impact assessment report.