Brisbane City Plan 2014 mapping
Brisbane City Plan 2014 contains maps that show where the provisions of the planning scheme apply across the Brisbane area. To make it easier to view these maps, Brisbane City Council has also produced an interactive mapping tool for zones, overlays, neighbourhood plan and priority infrastructure plan maps. Brisbane City Plan 2014 mapping should be viewed in conjunction with the ePlan.
Brisbane City Plan 2014 is regularly updated with new or amended information. The Table of Amendments (Appendix 2) lists essential detail. Further detail can be found on the Amendments page.
This tool enables you to navigate a map of Brisbane, either viewing it at the local government boundary or zooming in to suburb and street level, and view zone, overlay, neighbourhood plan and priority infrastructure plan maps. There are many different maps, or layers, which can be switched on to view. For example, the City Plan zoning can be switched on.
Use this tool to look up a property, switch on different layers (maps) and see how the property is affected by Brisbane City Plan 2014.
This mapping includes certain current Queensland Government State Planning Policy mapping where it supersedes the Brisbane City Plan 2014 maps, for example the ANEF mapping under the Airport Environs overlay.
This mapping is inaccessible to website assistive technologies. If you require assistance accessing or interpreting any of these maps please contact Council on 07 3403 8888.
By using Council's Brisbane City Plan 2014 interactive mapping you are choosing to accept the terms and conditions of this tool. Please refer to the help guide/FAQs for assistance with using this tool.
City Plan 2014 neighbourhood plan, zoning and overlay spatial data is available to download as open data in GIS formats through the Brisbane Open Data website.
Brisbane City Plan 2014 maps
Some documents on this page need Adobe Reader installed on your computer to view or print them. Some documents may also have a large file size and could take some time to download.
Strategic framework maps show Council’s vision for long term land use planning for Brisbane. The Strategic framework maps are not meant to be read at the individual property level; they provide a picture of the CityShape at a city-wide scale.
The zoning maps have been grouped by map tile. Please refer to the map index to locate the map relevant to your area of interest.
Overlay maps show either Queensland Government interests or where particular local circumstances are relevant to development. The purpose of overlays is to identify areas that:
- are sensitive to the effects of development
- constrain land or development
- are subject to valuable resources, and/or
- present opportunities for development.
City Plan 2014 neighbourhood plan, zoning and overlay map GIS files are now accessible on the Brisbane Open Data website.
Within City Plan, overlay mapping relates to overlay codes in Part 8.
The overlay maps have been grouped by map tile. Please refer to the map index to locate the map relevant to your area of interest.
City Plan includes the following:
- Active frontages in residential zones overlay
- Airport environs overlay - Obstacle Limitation Surfaces
- Airport environs overlay - Procedures for Air Navigation Services - Aircraft Operations Surfaces
- Airport environs overlay - Bird and bat strike zone and Public safety
- Airport environs overlay - Light intensity
- Airport environs overlay - Aviation facilities
- Airport environs overlay - Australian Noise Exposure Forecast Contour
- Airport environs overlay - Height restriction zone
- Bicycle network overlay
- Biodiversity areas overlay
- Bushfire overlay
- Coastal hazard overlay
- Commercial character building overlay
- Community purposes network overlay
- Critical infrastructure and movement network overlay
- Dwelling house character overlay
- Extractive resources overlay
- Flood overlay - Brisbane River
- Flood overlay - creek / waterway
- Flood overlay - overland flow
- Heritage overlay
- Industrial amenity overlay
- Landslide overlay
- Potential and actual acid sulfate soils overlay
- Pre-1911 building overlay
- Regional infrastructure corridors and substations overlay
- Road hierarchy overlay
- Significant landscape tree overlay
- Streetscape hierarchy overlay
- Traditional building character overlay
- Transport air quality corridor overlay
- Transport noise corridor overlay
- Transport noise corridor overlay - State designated noise corridor - rail network
- Transport noise corridor overlay - State designated noise corridor - State-controlled road
- Water resource catchments overlay
- Waterway corridors overlay
- Wetlands overlay
Neighbourhood plan maps show the boundary of each neighbourhood plan area, along with any precincts that may be relevant. Within City Plan, neighbourhood plan mapping is associated with the Neighbourhood plan codes in Part 7.
The Local Government Infrastructure Plan (LGIP) maps identify the priority infrastructure area (and associated localities), network keys, network service catchments and desired standards of service areas for the Brisbane local government area.
LGIP maps are referenced in section SC3.2 of Schedule 3 of Brisbane City Plan 2014.
Plans for trunk infrastructure maps
The plans for trunk infrastructure (PFTI) maps identify the existing and proposed trunk infrastructure in the schedule of works which is intended to service the predicted existing and future residential and non-residential development.
PFTI maps are referenced in section 4.6 of Part 4 of Brisbane City Plan 2014.
The PFTI maps have been grouped by map tile. Please refer to the map index to locate the map relevant to your area of interest.
Other maps identifies Long term infrastructure areas for the Brisbane local government area and identify infrastructure which will be required to service development beyond the horizon of the LGIP. Long term infrastructure maps are referenced in Part 10.3 of Brisbane City Plan 2014.
The other plan maps - Long term infrastructure plans - Stormwater network identify infrastructure which will be required to service development beyond the horizon of the LGIP. The other plan maps are referenced in section 10.3.2 Stormwater network of Part 10 of Brisbane City Plan 2014.
The long term infrastructure plans have been grouped by map tile. Please refer to the map index to locate the map relevant to your area of interest.